NRF24L01+ 2.4G wireless data transmission module 2.4GHz NRF24L01 upgrade version NRF24L01+PA+LNA 1000 Meters For Arduino
search
  • NRF24L01+ 2.4G wireless data transmission module 2.4GHz NRF24L01 upgrade version NRF24L01+PA+LNA 1000 Meters For Arduino

NRF24L01+ 2.4G wireless data transmission module 2.4GHz NRF24L01 upgrade version NRF24L01+PA+LNA 1000 Meters For Arduino

€18.00
Quantity
Last items in stock

  •  Arduino and Raspberry Pi compatible wireless 2.4GHz transceiver  
  • Includes 2.4GHz 2.2dBi duck antenna  
  • Signal PA (Power Amplifier) and LNA (Low-Noise Amplifier) extends the range of this module considerably
        Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation
    To maximize the transmission/reception distance (range) we recommend the following:

       
  • using a slower data rate, preferrably 250kbps   
  • in addition to the GND header pin we recommend also connecting your source ground to the ground through-holes or castellations near the brass antenna connector   
  • adding a 10uF capacitor across GND and V+ to assist with power demands during transmitting and receiving  
  • using a dedicated 3.3V power source instead of an Arduino's 3.3V supply, a good 3.3V regulator such as the LD33V works well

    The module will work without the above recommendations but following the above recommendations will increase the module's total range
F228
1 Item