USB To RS485 converter allows PC users to connect their RS-485 devices to systems that use USB interface. By attaching the converter to a PC, it will no longer be necessary to open the chassis or turn off the PC to install the hub. With the converter, the user instantly gets one extra high-speed RS-485 ports. In addition, since the power is derived from the USB port, there are not any cumbersome power adapters. This makes the converter especially suitable for PLCs, printers, POS system and industrial control devices.
Features:
- Support plug and play and hot plug (USB side)
- Support baud rate range: 75-115200bps
- Fully compliant with USB 2.0 standard, compatible with USB1.1
- Communication distance can reach 1.2KM, with industrial site anti-interference ability
- TVS transient suppression protection
- Fully compliant with USB 2.0 standard, compatible with USB1.1
- Support plug and play and hot plug (USB side)
- Extended temperature range from -40°C to +85°C
Pin Description:
- pin 1: A--485 Signal Terminal A
- pin 2: B--485 Signal Terminal B
- pin 3: GND--485 signal ground (optional)
- pin 4: GND- external power supply ground (can be used to supply power to other equipment or it can be empty)
- pin 5: VCC - external power supply 5V+(can be used to supply power to other equipment or it can be empty)
Wiring instructions
- USB interface: plug directly into the computer USB interface when using
- RS485 bus interface: module A interface is connected to target device A interface, module B interface is connected to target device B interface (some device flags D+ means A, D- means B)
- Up to 256 related devices can be attached to the bus
Applications
- Parameter setting of various RS485 port devices, data transmission communication and LED display communication data, etc.
- Monitoring data reading and writing and PTZ control
- Home appliance control
- Various industrial automation, instrumentation
- Access control system, charging system, attendance system, etc.