• Out-of-Stock
12V RF Wireless Remote Switch Controller Dimmer for Mini LED Strip Light
search
  • 12V RF Wireless Remote Switch Controller Dimmer for Mini LED Strip Light
  • 12V RF Wireless Remote Switch Controller Dimmer for Mini LED Strip Light
  • 12V RF Wireless Remote Switch Controller Dimmer for Mini LED Strip Light
  • 12V RF Wireless Remote Switch Controller Dimmer for Mini LED Strip Light

12V RF Wireless Remote Switch Controller Dimmer for Mini LED Strip Light

€7.00

12V RF Wireless Remote Switch Controller Dimmer for Mini LED Strip Light

Quantity
Out-of-Stock

Instructions for RF Wireless Remote
1.Turn On/ Standby   
Press this key to turn on unit or switch to standby mode. Unit will turn on and restore to previous status at powering on moment.  
2. Lighting mode 
Switch to lighting mode from dynamic mode.
3/8/9. Dimmer Adjust Shortcuts 
Switch to 100%, 50%, or 25% brightness lighting mode.
4/6. Dynamic Mode Adjust 
Switch to dynamic mode from lighting mode, or switch between different dynamic modes.
5/7. Speed Adjust
Adjust playing speed of dynamic modes. Press SPEED+ to increase seed and press SPEED- to decrease. 
10/11. Brightness Adjust (Dimmer)      
Adjust lighting mode brightness. Press BRIGHT+ to increase brightness and press BRIGHT- to decrease         

Functions for RF Wireless Remote
Dimmer & Dynamic  
8 Dynamic Effects 
10-level Dimmer 
256-Grade PWM 
Speed Adjustable 
Card Type Remote 
Ultra Slim Design 
Smooth Dimmer Effect 
1 to 1 Remote Paired  
Auto Save Function
          
Installing for RF Wireless Remote
1. Power Supply     
This unit accepts DC 5V to 24V power supply. The red cable should be connected to positive and black cable to negative.  
Please select proper power supply according to the LED application.
2. LED Output     
The red cable should be connected to LED positive and black cable to negative. The peak output current   is 12A, please reduce load if main unit is overheating.
CAUTION:Do not short circuit the LED output, this may  lead to permanent damage!
3. Remote Control       
Please pull out the insulate part before using. The RF wireless remote signal can pass through barrier, so it\'s not necessary to aim at the main unit when operate. For proper receiving remote signal, do not install the main unit in closed metal parts. The remote battery is 3V CR2025 type, please only replace with same type battery.         

Specification
Dynamic mode:  8 modes         
Dynamic speed level:  10 levels         
Lighting brightness level : 10 levels         
PWM grade:  256 grades         
Smooth dimmer effect:   Yes         
Working voltage:  DC 5~24V         
Output current :  peak 12A          
Remote control mode:  RF Wireless 
Remote frequency:  433.92MHz         
Remote distance :  >15m at open area  
D0303
New
Comments (0)
No customer reviews for the moment.