Soldering and Desoldering Wire Solder Wick CP-2515 CP
€3.00
Desoldering braid or desoldering wick is a pre-fluxed copper braid that is used to remove solder, which allows components to be replaced and excess solder (e.g. bridging) to be removed.
The soldering iron is applied to the wick as it sits on the solder joint, and when both are brought up to the solder’s melting point, the flux is activated and, through capillary action from the braided design, solder is drawn up the wick.
Specifications
- Requires little or no post solder cleaning
- No corrosive residues
- Halide free
- ESD Safe bobbins meet specs: MIL-STD-1686C MIL-HDBK-263B Static decay provision of MIL-B-81705C
- Minimal risk of heat and static component damage
E608,E527
3 Items
New
Desoldering braid or desoldering wick is a pre-fluxed copper braid that is used to remove solder, which allows components to be replaced and excess solder (e.g. bridging) to be removed.
The soldering iron is applied to the wick as it sits on the solder joint, and when both are brought up to the solder’s melting point, the flux is activated and, through capillary action from the braided design, solder is drawn up the wick.