DS9638CN DIP8 DS9638 IC

General Description:
The DS9638 is a Schottky, TTL compatible, dual differential
line driver designed specifically to meet the EIA Standard
RS-422 specifications. It is designed to provide unipolar
differential drive to twisted pair or parallel wire transmission
lines. The inputs are TTL compatible. The outputs are similar
to totem pole TTL outputs, with active pull-up and pull-down.
The device features a short circuit protected active pull-up
with low output impedance and is specified to drive 50Ω
transmission lines at high speed. The mini-DIP provides high
package density.

Features:

•  Single 5V supply
•  Schottky technology
•  TTL and CMOS compatible inputs
•  Output short circuit protection
•  Input clamp diodes
•  Complementary outputs
•  Minimum output skew (<1.0 ns typical)
•  50 mA output drive capability for 50Ω transmission lines
•  Meets EIA RS-422 specifications
•  Propagation delay of less than 10 ns
•  “Glitchless” differential output
•  Delay time stable with VCC and temperature variations
  (<2.0 ns typical) (Figure 3)
•  Extended temperature range