Arduino Prototyping Prototype Shield ProtoShield With Mini Breadboard
ProtoShield is used in conjunction with Arduino Uno.
Used to build a circuit prototype, can be directly soldered components on the board.
Can also be connected through the mini breadboard circuit.
1 reset button, 1 power indication LED and 1 LED connected to Pin 13.
1 general use button and 1 LED circuits (unconnected).
5V, GND, and Raw pins are exposed as well.
SOIC place for IC.
The mini breadboard has 170 tie points.
The breadboard sticks on the prototype shield with its self-adhesive backing.
1: Arduino prototype shield
2: Mini breadboard
Current Consumption: 0.6 mA
Barometric Pressure Measure Range: 300 – 1100 hPa Accuracy: ±1.0 hPa
Temperature Measurement Range: -40 to 85 Accuracy: ±1
Crowtail Port: I2C
Dimensions: 11.5mm x 15mm
You might also like